Check Point Endpoint Security Client For Mac
- Check Point Endpoint Security
- Check Point Endpoint Security
- How To Remove Check Point Endpoint Security
About Check Point Software Technologies Check Point Software Technologies Ltd. (www.checkpoint.com) is the worldwide leader in securing the Internet.
Endpoint Security VPN for Windows 32-bit/64-bit E75.10 User Guide
14 March 2011
© 2011 Check Point Software Technologies Ltd. All rights reserved. This product and related documentation are protected by copyright and distributed under licensing restricting their use, copying, distribution, and decompilation. No part of this product or related documentation may be reproduced in any form or by any means without prior written authorization of Check Point. While every precaution has been taken in the preparation of this book, Check Point assumes no responsibility for errors or omissions. This publication and features described herein are subject to change without notice. RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227–7013 and FAR 52.227–19. TRADEMARKS: Refer to the Copyright page (http://www.checkpoint.com/copyright.html) for a list of our trademarks. Refer to the Third Party copyright notices (http://www.checkpoint.com/3rd_party_copyright.html) for a list of relevant copyrights and third-party licenses.
Important Information Latest Documentation The latest version of this document is at: http://supportcontent.checkpoint.com/documentation_download?ID=11993 For additional technical information, visit the Check Point Support Center (http://supportcenter.checkpoint.com).
Revision History Date
Description
14 March 2011
Initial version.
Feedback Check Point is engaged in a continuous effort to improve its documentation. Please help us by sending your comments (mailto:[email protected]?subject=Feedback on Endpoint Security VPN for Windows 32-bit/64-bit E75.10 User Guide).
Contents Important Information ……………………………………….. 3 Introduction to Remote Access Clients …………………………… 5 Client Platforms ……………………………………………5 The Installation Process ………………………………………5 Receiving an Automatic Upgrade ………………………………..6 Getting Started …………………………………………….. 7 Defining a Site …………………………………………….7 Basic Operations …………………………………………..9 Connect Window …………………………………………..9 Client Icon ……………………………………………….9 Understanding the Firewall …………………………………..10 Disabling the Firewall …………………………………….10 Compliance ……………………………………………..10 Setting up a Remote Access Client …………………………….. 12 Configuring Proxy Settings ……………………………………12 Configuring VPN ………………………………………….12 Changing the Site Authentication Scheme …………………………13 Certificate Enrollment and Renewal …………………………..13 Importing a Certificate into the CAPI Store ………………………15 Authenticating with Certificate File ……………………………15 SecurID………………………………………………15 Challenge-Response ……………………………………..16 Secure Authentication API (SAA) …………………………….16 Collecting Logs ……………………………………………. 17 Secure Domain Logon………………………………………. 17
Chapter 1 Introduction to Remote Access Clients Remote Access Clients E75.10 are lightweight remote access clients for seamless, secure IPSec VPN connectivity to remote resources. They authenticate the parties and encrypt the data that passes between them. Remote Access Clients E75.10 are intended to replace the current Check Point remote access clients: SecureClient NGX, Endpoint Connect NGX, and SecuRemote client NGX. The clients offered in this release are:
Endpoint Security VPN — Replaces SecureClient and Endpoint Connect.
Check Point Mobile for Windows — New Remote Access Client.
SecuRemote — Replaces SecuRemote client NGX. In This Chapter Client Platforms The Installation Process Receiving an Automatic Upgrade
5 5 6
Client Platforms You can install this version of Remote Access Clients on several Windows platforms.
Microsoft Windows XP 32 bit SP2, SP3
Microsoft Windows Vista 32 bit and 64 bit SP1
Microsoft Windows 7, all editions 32 bit and 64 bit
The Installation Process Important — To install a Remote Access client on any version of Windows, you need Administrator permissions. Consult with your system administrator.
To install a Remote Access client: 1. Log in to Windows with a user name that has Administrator permissions. 2. Get the installation package from your system administrator, and double-click the installation package. 3. Follow the installation wizard. Note — On Windows Vista and Windows 7, there may be a prompt to allow access, depending on the UAC settings. 4. If your administrator did not include a specified Remote Access client in the installation package, you are prompted to choose a product to install. Your administrator might have instructed you which client to install. The options are:
Endpoint Security VPN
Check Point Mobile for Windows Page 5
Receiving an Automatic Upgrade
SecuRemote After installation, the Client icon appears in the system tray notification area. 5. Double-click the Client icon. If you are prompted to define a site, make a site with the IP address that your system administrator gave you.
Receiving an Automatic Upgrade If you have a Check Point VPN Client, when you connect to a site you might receive an automatic upgrade to the latest version of Remote Access Clients. Follow instructions to complete the upgrade. Depending on the settings set by your administrator, you might not need to do anything. When you open your client from the client icon, you will see that it has a new name and looks different.
Introduction to Remote Access Clients
Page 6
Chapter 2 Getting Started In This Chapter Defining a Site Basic Operations Connect Window Client Icon Understanding the Firewall Compliance
7 9 9 9 10 10
Defining a Site You need at least one site to connect to a VPN. If your system administrator pre-configured the client package, you can connect to the VPN site immediately. If not, you must define the site. Before you begin, make sure you know how you will authenticate to the VPN and that you have the credentials (password, certificate file, or whatever the system administrator says you need). Also, you may need the gateway fingerprint, to verify that the client is connecting to the correct gateway. You should get this from your system administrator.
To define a site: 1. Right-click the client icon and select VPN Options. The Options window opens.
The first time you open the window, no sites are listed. 2. On the Sites tab, click New.
Page 7
Defining a Site
The Site Wizard opens.
3. Click Next. 4. Enter the name or IP address of the Security Gateway and click Next.
It may take a few minutes for the Client to identify the site name. After resolving the site, a security warning may open: The site’s security certificate is not trusted! While verifying the site’s certificate, the following possible security risks were discovered: Ask your system administrator for the fingerprint of the server. If the server fingerprint matches the fingerprint in the warning message, you can click Trust and Continue. Otherwise, consult with your system administrator. The Authentication Method window opens.
Getting Started
Page 8
Basic Operations
5. Select an authentication method according to your system administrator’s instructions. 6. Click Next and follow the instructions to enter your authentication materials. If you selected Secure Authentication API (SAA), an SAA window opens to select the type of SAA. and a DLL file to use. See Secure Authentication API (SAA) (on page 16). 7. Click Finish. The client offers to connect you to the newly created site. 8. Click Yes to connect to the site, or No to save the site details and connect later.
Basic Operations Right-click the Client icon in the system tray to access basic operations. (Not all options appear for every client status and configuration.) To quick connect to last active site, double-click the Client icon. To access other basic operations, right-click the Client icon and select an option. Option
Function
Connect
Opens the main connection window, with the last active site selected. If you authenticate with a certificate, the client immediately connects to the selected site.
Connect to
Opens the main connection window.
VPN Options
Opens the Options window to set a proxy server, choose interface language, enable Secure Domain Logon, collect logs, and select a DLL file for SAA Authentication.
Register to Hotspot
Lets you bypass the firewall to register to a hotspot. After you click this option, open a browser. It will open to the hotspot registration page.
Show Compliance See if your computer is compliant with the Security Policy, and if not, why not and how Report to fix the issue. Show Client
Open the Client overview.
Shutdown Client
Closes the Client and the VPN connection.
You can also access most of these options from the Client Overview.
Connect Window In the Connect window, you provide authentication to connect to the VPN
If you have a Certificate, browse to the certificate file and provide the password.
If you use SecurID, enter your PIN or passcode. If you get a key in response, copy it.
If you use Username and Password, enter your username and password.
If you use Challenge Response, provide the first key. When the challenge comes, provides the response.
If you use SAA, click Connect and a new window opens for authentication.
Client Icon The Client icon in the system tray notification area shows the status of Remote Access Clients.
Getting Started
Page 9
Understanding the Firewall
Icon
Status Disconnected Connecting Connected Encryption (encrypted data is being sent or received on the VPN) There is an issue that requires users to take action.
You can also hover your mouse on the icon to show the client status.
Understanding the Firewall When Endpoint Security VPN is installed on your computer, it includes a firewall. The firewall examines all network traffic that comes to your computer and asks:
Where did the traffic come from and where is it addressed to?
Do the firewall rules allow traffic to that address?
Does the traffic violate global rules?
Based on the answers to these questions, traffic is allowed or blocked. The administrator sets the policies and rules that control what traffic the firewall allows.
Disabling the Firewall Your administrator can give you the option to disable the firewall on your computer. If you do have this option, when you right-click the Endpoint Security VPN icon in the system tray, one of the choices is Disable Security Policy. If you select this, the firewall is disabled. Depending on the compliance settings, you might not be able to connect to the VPN if your firewall is disabled. If the firewall is disabled, the option Enable Security Policy shows in the right-click menu of the Client icon. Select this to enable the firewall.
Compliance Your administrator can configure checks for your computer or device to make sure it is compliant before you connect to the VPN site. Some examples of what these checks can include are:
If your Operating System is supported.
If you are logged in correctly.
If you have an updated Anti-virus client.
Your computer must be compliant with all checks to access the VPN. If your computer is not compliant, the Client icon looks like this:
Getting Started
Page 10
Compliance
If your computer is found to be non-compliant based on one check, you cannot access the VPN. In the Client Overview window, it shows that you are not compliant and a message opens. If your computer does not comply based on multiple factors you can see multiple messages.
Follow the instructions in the message to make your computer compliant. If you have questions, contact your administrator. You can see a compliance report that shows if your computer is compliant with the Security Policy, and if not, how to fix the issue. To get a compliance report, right-click the Client icon in the system tray and select Show Compliance Report. The compliance check always works in the background, if you are connected to the VPN or not. At any time it can report that your computer has failed a check and is not compliant.
Getting Started
Page 11
Chapter 3 Setting up a Remote Access Client In This Chapter Configuring Proxy Settings Configuring VPN Changing the Site Authentication Scheme
12 12 13
Configuring Proxy Settings If you are at a remote site which has a proxy server, the client must be configured to pass through the proxy server. Usually the client can detect proxy settings automatically. If not, you can configure it. Before you begin, get the IP address of the proxy server from the local system administrator. Find out if the proxy needs a user name and password.
To configure proxy settings: 1. Right-click the Client icon and select VPN Options. The Options window opens. 2. Open the Advanced tab. 3. Click Proxy Settings. The Proxy Settings window opens. 4. Select an option.
No Proxy — Make a direct connection to the VPN.
Detect proxy from Internet Explorer settings — Take the proxy settings from Internet Explorer > Tools > Internet options > Connections > LAN Settings.
Manually define proxy — Enter the IP address port number of the proxy. If required, enter a valid user name and password for the proxy. 5. Click OK.
Configuring VPN You may have the option to go through the VPN for all your Internet traffic. This is more secure.
To configure VPN Tunneling: 1. Right-click the Client icon and select VPN Options. The Options window opens. 2. On the Sites tab, select the site to which you want to connect, and click Properties. The Properties window for the site opens.
Page 12
Changing the Site Authentication Scheme
3. Open the Settings tab.
4. In VPN tunneling, click Encrypt all traffic and route to gateway. Note — In SecuRemote, this option is disabled, If this option is disabled in Endpoint Security VPN or Check Point Mobile for Windows, consult your system administrator. 5. Click OK.
Changing the Site Authentication Scheme If you have the option from your system administrator, you can change the way that you authenticate to the VPN.
To change the client authentication scheme for a specific site: 1. Right-click the Client icon and select VPN Options. The Options window opens 2. On the Site tab, select the relevant site and click Properties. The Properties window for the site opens. On the Settings tab, select the appropriate Authentication Scheme drop-down menu option.
Username and password
Certificate — CAPI
Certificate — P12
SecurID — KeyFob
SecurID — PinPad
SecurID — Software Token
Challenge Response
SAA — Username and Password
SAA — Challenge Response
Certificate Enrollment and Renewal You can import a certificate to the CAPI store or save it to a folder of your choice.
Setting up a Remote Access Client
Page 13
Changing the Site Authentication Scheme
Before you enroll a certificate, make sure you have the registration key from the system administrator. Ask the system administrator whether you should use CAPI (if so, ask for the provider name) or P12.
To enroll a certificate: 1. Right-click the Client icon in the system tray, and select VPN Options. 2. On the Sites tab, select the site from which you want to enroll a certificate and click Properties. The site Properties window opens. 3. Select the Settings tab.
4. Choose an Authentication Method (Certificate — CAPI or Certificate — P12), and click Enroll.
CAPI: In the window that opens, select the provider.
P12: In the window that opens, enter a new password for the certificate and confirm it.
5. Enter the Registration Key that your administrator sent you. 6. Click Enroll. Your system administrator may tell you to renew your certificate, or you see a message that the certificate expired.
To renew a certificate: 1. In the Settings tab > Method, select either Certificate — CAPI or Certificate — P12. 2. Click Renew. In the window that opens, select your certificate type:
Setting up a Remote Access Client
Page 14
Changing the Site Authentication Scheme
CAPI: select the certificate from the list.
P12: browse to the P12 file and enter the password. 3. Click Renew.
Importing a Certificate into the CAPI Store Before you can use the certificate to authenticate your computer, you must get:
The certificate file.
The password for the file.
The name of the site (each certificate is valid for one site).
If the system administrator said to save the certificate on the computer, import it to the CAPI store. (Otherwise, the administrator will give you the certificate file on a USB or other removable media. Make sure you get the password.)
To import a certificate file to the CAPI store: 1. 2. 3. 4. 5. 6. 7.
Right-click the client tray icon, and select VPN Options. On the Sites tab, select the site and click Properties. Open the Settings tab. Make sure that Certificate — CAPI is selected in the Method list. Click Import. Browse to the P12 file. Enter the certificate password and click Import.
Authenticating with Certificate File If Certificate — P12 is used, browse to the P12 file to authenticate.
To authenticate with a P12 file: 1. Configure the client to use Certificate — P12 for authentication. 2. Connect to the site. The connection dialog opens. 3. In the Certificate File area, browse to the P12 file. 4. Enter the certificate password. 5. Click Connect. Note — If Always-Connect is on, the Client asks for the certificate password if a secure connection is lost. You do not have to browse to the certificate file again.
SecurID RSA SecurID authentication uses hardware (Key Fob or PINPad) or software (softID) that generates an authentication code at fixed intervals (usually one minute), with a built-in clock and an encoded random key. The Client uses both the PIN and tokencode, or just the passcode, to authenticate to the Security Gateway.
The most common form of SecurID token is the hand-held device, usually a Key Fob or PINPad.
With PINPad, you enter a personal identification number (PIN), to generate a passcode that you can use for the client.
When the token does not have a PINPad, a tokencode is displayed. A tokencode is the changing number displayed on the Key Fob. If Key Fob is the authentication method, you enter the PIN and the tokencode separately.
SoftID operates the same way as a passcode device, but consists only of software that sits on the desktop. You can use it as a simple Key Fob and copy the token code. Or, you can set the authentication method to SecurID Software Token, and the client will take the token code automatically.
Setting up a Remote Access Client
Page 15
Changing the Site Authentication Scheme
Challenge-Response Challenge-response is an authentication protocol in which one party provides the first string (the challenge), and the other party verifies it with the next string (the response). For authentication to take place, the response is validated.
Secure Authentication API (SAA) Secure Authentication API (SAA) lets you use third- party authentication technologies with your Remote Access client. To work, it requires a DLL file that is installed on your client. If your administrator instructs you to select Secure Authentication API (SAA) as the authentication method when you create a site, you need this information:
The type of SAA authentication that you must select — one of these:
Username and Password — Users enter a username and password.
Challenge Response — Users enter a response to a challenge.
You might need a DLL file. If your administrator already configured this, then you do not need it. Note — Only users with administrator permissions can replace the DLL.
If you select SAA as the authentication in the site wizard, a new page opens where you select the type of SAA authentication and a DLL file, if required.
Replacing the SAA DLL File Your administrator might instruct you to replace the DLL file on your client. Note — Only users with administrator permissions can replace the DLL.
To replace the local DLL file: 1. Right-click the client icon and select Options. 2. In the Advanced tab, next to Use a Secure Authentication API File, browse to select the new DLL file. This file is used for SAA authentication.
Setting up a Remote Access Client
Page 16
Changing the Site Authentication Scheme
Connecting to a Site with SAA Usually, when you connect to a site, a login window opens and you enter your authentication information directly in that window. If SAA is the authentication method for the site, there are no fields for authentication information in the login window. You must click the Connect button in the window and a new window opens for authentication information.
Collecting Logs If your system administrator or help desk asks for logs to troubleshoot issues, you can collect the logs from your client.
To collect logs: 1. 2. 3. 4. 5.
Right-click the Client icon and select VPN Options. Open the Advanced tab. Click Enable Logging. Reproduce the problem. Click Collect Logs. Note — The logs are saved to %TEMP%tractrlogs_timestamp.cab. It opens after the logs are collected. This folder is sometimes hidden. If you need to locate this folder, in Control panel > Folder Options > View, select Show hidden files and folders.
Secure Domain Logon If the system administrator says that you should use SDL, you can configure your client in this way.
To enable SDL on a client: 1. 2. 3. 4.
Right-click the Client icon and select VPN Options. In Options > Advanced, select Enable Secure Domain Logon (SDL). Click OK. Restart the computer and log in.
Collecting Logs
Page 17
Multimedia |Business |Messengers |Desktop |Development |Education |Games |Graphics |Home |Networking |Security |Servers |Utilities |Web Dev| Other
Sort by: Relevance
Check Point Endpoint Security
Check Point endpoint security solutions provide data security, network security, advanced threat prevention, forensics and remote access VPN for complete endpoint protection. Check Point Anti-Malware and Application Control further help to efficiently detect malware with a single scan and make sure only approved software programs are running on end-user systems.
- Publisher: Checkpoint Software Inc.
- Home page:www.checkpoint.com
- Last updated: June 14th, 2016
Check Point R70
Software Blades enable users to efficiently and quickly tailor Security Gateway and Management functionality to specific and changing needs. When running on multi-core platforms and appliances, Check Point CoreXL technology delivers near linear performance scalability for many of the Software Blades.
- Publisher: CheckPoint
- Home page:supportcenter.checkpoint.com
- Last updated: May 23rd, 2012
Check Point Capsule Docs
Check Point Capsule Docs is a secure mobile document management system that follows your documents wherever they go, making sure you have complete control over who is accessing sensitive data and what they can do with it. It secures all documents by default so they cannot be unintentionally shared.
- Publisher: Check Point Software Technologies Ltd.
- Home page:www.checkpoint.com
- Last updated: March 29th, 2016
Pointsec for PC
The Check Point Full Disk Encryption Software Blade provides automatic security for all information on endpoint hard drives, including user data, operating system files and temporary and erased files. For maximum data protection, multi-factor pre-boot authentication ensures user identity, while encryption prevents data loss from theft.
- Publisher: Check Point Software
- Home page:supportcenter.checkpoint.com
- Last updated: August 21st, 2008
Check Point SmartConsole R75.10
This release, E75.10 Remote Access Clients, adds new features and two additional VPN Clients: Check Point Mobile for Windows and SecuRemote.This Software Download Agreement (“Agreement”) is between you (either as an individual or company) and Check Point Software Technologies Ltd. (‘Check Point’), for the software and documentation provided by this Agreement (“Software”).
- Publisher: Check Point Software Technologies Ltd.
- Home page:supportcenter.checkpoint.com
- Last updated: May 26th, 2011
Cisco Security Conversion Tool
Cisco Security Conversion Tool (SCT) is a software program to assist in converting a Check Point Firewall configuration into a Cisco ASA, PIX, or FWSM configuration. Converts one Check Point configuration at a time with a simple wizard-based GUI. Converts from Check Point 4.x and NG Firewalls
- Publisher: Cisco Systems
- Home page:www.cisco.com
- Last updated: May 28th, 2010
Check Point SmartConsole R71.30
This version contains new features and resolvesvarious issues for Check Point Software Blades.Check Point SmartConsole R71.30 features:- Check Point Mobile for iPhone and iPad- Access to Web applications- Access to email, calendar, and contacts- Two-factor authentication with client certificate and username/password
- Publisher: CheckPoint
- Home page:supportcenter.checkpoint.com
- Last updated: March 21st, 2012
GeoMetis SPSCheck
SPSCheck allows the user to check the SPS data filefor format compliance and to view the data in a number of ways which will allow evaluation of the data.Features:Easily check SPS files as both raw data and graphicallyManage and interact with files from a whole project.Check files for format complianceView header attributesMap individual file points, swaths or the entire survey
- Publisher: Quest Geo Solutions Limited
- Home page:www.qgsl.com
- Last updated: November 30th, 2011
Check Point SSL Network Extender
SSL connections are a great remote access solution because they do not require IT departments to upgrade and manage client software. All a user needs is a Web browser. However, remote users still need to access network applications. SSL Network Extender is a browser plug-in that provides clientless remote access, while delivering full network connectivity for any IP-based application.
TeamSpeak also includes advanced configuration options for users who already have experience in this type of programs and who want to improve the quality of their communications with the rest of the people in the team. Teamspeak for mac client download. It will allow us to make video chats or sending messages as well as we can do with other similar programs. This software is an app that also offers a great quality in our communications.
- Publisher: CheckPoint
- Last updated: March 15th, 2008
Check Point VPN-1 SecuRemote/SecureClient NGX R60 HFA3
The SecureClient allows you to connect to your organization in a secure manner, while at the same time protecting your machine from attacks that originate on the Internet. You can access private files over the Internet knowing that unauthorized persons cannot view the same file or alter it.
- Publisher: Check Point
- Home page:supportcenter.checkpoint.com
- Last updated: December 18th, 2009
Check Point SmartConsole R70
SmartDashboard is a single, comprehensive user interface for defining and managing multiple elements of a security policy: firewall security, VPNs, network address translation, web security, desktop security, anti-virus security, SmartDefense threat defense protections, QoS and VPN client security.
- Publisher: Check Point Software Technologies Ltd.
- Home page:www.checkpoint.com
- Last updated: March 13th, 2009
Check Point SmartConsole R75
In the face of increasingly sophisticated attacks, it takes multiple layers of security to be protected today — at the perimeter, inside the network, at all user endpoints. How can you manage the growing complexity? Check Point’s Network Policy Management Software Blade gives you control over configuring and managing even the most complex security deployments
Have you been searching for an accessible MUD client for the Mac? Well, iAccessibility is excited to announce that your wait is over. IAccessibility is proud to announce MUDAbility, an accessible MUD client for the Mac. Rapscallion is a highly advanced MUD client, designed to suit all styles of MUD, and all styles of mudding. It is currently the Mac client of choice on many MUDs, MOOs, MUSHes, MUVEs, chat servers and others, and some of its more unusual features make it ideal for other uses, such as the Internet Relay Chat (IRC). A MUD (/ ˈ m ʌ d /; originally Multi-User Dungeon, with later variants Multi-User Dimension and Multi-User Domain), is a multiplayer real-time virtual world, usually text-based. MUDs combine elements of role-playing games, hack and slash, player versus player, interactive fiction, and online chat. Best mud client for mac.
- Publisher: CheckPoint
- Home page:supportcenter.checkpoint.com
- Last updated: January 11th, 2011
Check Point — Full Disk Encryption Dynamic Mount Utility
Full Disk Encryption’s Dynamic Mount Utility is used you need to access information on the hard disk of a Full Disk Encryption — protected machine and do not want to access this information by performing a recovery, for example, if you need to access a disk for forensic reasons or because a failure of the operating system makes it impossible to retrieve data on a disk.
- Publisher: Check Point Software Technologies LTD
- Home page:supportcenter.checkpoint.com
- Last updated: May 11th, 2010
Check Point VPN-1 SecuRemote/SecureClient NGX R60 HFA1
Check Point recommends that customers remain up-to-date with the latest HFAs, as they contain security enhancements and protection against new and evolving.rnThis HFA is a recommended update that resolves various issues and contains improvements for SecureClient and other Check Point products on a variety of platforms.
- Publisher: Check Point Software Technologies
- Home page:www.checkpoint.com
- Last updated: March 2nd, 2008
Check Point SmartConsole NGX R60
Check Point SmartConsole NGX R60 5.0
Download FileZilla Client 3.38.1 for Mac OS X. The latest stable version of FileZilla Client is 3.38.1. Please select the file appropriate for your platform below. Jan 23, 2009 Solved: FTP client for mac OS X 10.4? Discussion in ‘Apple Mac’ started by dorianjazz, Dec 26, 2008. Thread Status: Not open for further replies. Hey i had the same problem as you so i did a search for Filezilla Mac OS X 10.4 and got an older version. You can find it here. Filezilla client for mac os x 10.4. For Mac OS X 10.5 or higher equipped with Intel chipset. Mac OS X Leopard (10.5)users equipped with PowerPC chipset have to download FileZilla 3.2.4.1 for PPC. Mac OS X Tiger (10.4 or higher) users have to download Filezilla 3.0.6. Jul 24, 2018 Notes. For Mac OS X 10.5 or higher equipped with Intel chipset. Mac OS X Leopard (10.5)users equipped with PowerPC chipset have to download FileZilla 3.2.4.1 for PPC. Mac OS X Tiger (10.4 or higher) users have to download Filezilla 3.0.6. FileZilla Client for Mac is an open-source program that allows you to make FTP transfers. It is a bare-bones application that is easy to use and which should suit the needs of anyone looking to.
- Publisher: Check Point Software Technologies Ltd.
- Last updated: April 18th, 2008
OverDrive Media Console
Check Point Endpoint Security
OverDrive Media Console is an eBook and audio book reader for PCs and portable devices. It can run on iPhone/iPad, Android, and even on the high-end versions of Kindle and Nook. The built-in browser can be used to find, check out and download digital titles and read/listen to them using the application.
- Publisher: OverDrive Media, Inc.
- Home page:omc.overdrive.com
- Last updated: May 8th, 2012
CuteFTP
CuteFTP helps you automate file transfer and synchronization operations using scripts. You can write scripts to regularly back up or synchronize your sites, and monitor local folders for changes. You can also do file transfers manually by simply dragging and dropping to its interface.
- Publisher: GlobalSCAPE, Inc.
- Home page:www.cuteftp.com
- Last updated: August 15th, 2018
Check Point Endpoint Security
ZoneAlarm Free Antivirus + Firewall
ZoneAlarm Free Antivirus+Firewall is a security solution for users who want their computers to be protected by viruses, spyware, Trojan horses, malware, worms and other threats that can harm their systems. In order to start enjoying its features, you need to complete a simple installation process.
- Publisher: Check Point Software Technologies Ltd.
- Home page:www.zonealarm.com
- Last updated: June 30th, 2019
